Picture of 7.5 HP Cast Iron Centrifugal Pump / Motor Units, MotorPump Model 52

7.5 HP Cast Iron Centrifugal Pump / Motor Units, MotorPump Model 52

For Industrial Applications

2.5" x 2" FPT Ports.
Close-Coupled Motors, 3 Phase, 3500 RPM, Open Drip-Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) Motors, 2 HP through 7.5 HP Available.
Standard Fitted (Iron Casing, Adapter & Impeller, Brass Wear Ring, Mechanical Seal as Noted), Max Temp 180° F., EPDM or Buna Mechanical Seals (Viton® also Available). Do Not Use EPDM Seals for Oil-Based or Solvent-Based Products (Use Buna or Viton®).
Bronze Fitted, All Bronze and All Iron Also Available.
Enclosed Impellers for Maximum Efficiency.

Note: NOT SUITABLE for use with Fertilizer. Internals are brass.
Need a fertilizer pump? Click here to view Scot's Agricultural Pumps
Many Other Models Available Including Pump Ends & Repair Kits.
S.G. = Specific Gravity. Water has Specific Gravity of 1.0 (and 8.34 Lbs./Gal). If product is heavier than water and Max. S.G. shown for pump is 1.0, then do not use or call for similar pump with additional horsepower.

Manufacturer:

Part No.	Catalog	Description	Price
SKU: SC3083K236WPE	Catalog: E3395	Description: Industrial Centrifugal Pump / TEFC Motor Unit, Model 52, Cast Iron, 2.5" X 2" FPT, 7.5 HP, 3 PH, 208-230/460 Volts, 280 Max GPM, 250 GPM @ 30 PSI, 6.0" Impeller, EPDM Seal	Price: $3,318.00 / EA	i h
SKU: SC3083K299BPE	Catalog: E3395	Description: Industrial Centrifugal Pump / TEFC Motor Unit, Model 52, Cast Iron Bronze Fitted, 2.5" X 2" FPT, 7.5 HP, 3 PH, 208-230/460 Volts, 280 Max GPM, 250 GPM @ 30 PSI, 6.0" Impeller, EPDM Seal	Price: $3,225.00 / EA	i h
SKU: SC3083K429WPE	Catalog: E3395	Description: Industrial Centrifugal Pump / TEFC Motor Unit, Model 52, Cast Iron, 2.5" X 2" FPT, 7.5 HP, 3 PH, 208-230/460 Volts, 180 Max GPM, 108 GPM @ 30 PSI, 5.63" Impeller, EPDM Seal	Price: $3,436.00 / EA	i h

Additional Information

Viton® is a registered trademark of DuPont Performance Elastomers.