"Dominator" Sewage Pump, 2 HP, 460 Volt, 3 PH Motor, 180 gpm @ 10 ft. Max Flow, 160 GPM Flowrate @ 15' Head, Manual, 46' Shut-Off, 9" Dia. x 20-1/4" H

Stainless Steel • 460 Volt • 3PH • 2HP • 2" FPT

An excellent choice when effluents, sewage and larger solid handling is required.

• Oil-lubricated double mechanical seals with Viton® elastomers
• 2" Solids handling capability
• Rated for continuous duty
• 304 stainless with high quality corrosion-resistant materials
• Permanent split capacitor motors good for 20 starts per hour
• Built-in thermal protection on single phase models
• ISO2548 Rating
• 25' UL/CSA Water resistant cord
• Manual or Automatic shut-off available
• Operates fully or partially submerged.

The ideal choice for pumping Industrial, Agricultural or Commercial waste water with suspended solids up to 2" diameter. Available in 1/2 hp through 2 hp sizes in single or three phase. Standard with 25' cords. Rated to 105° F. continuous or 140° F. intermittent duty. Ports are 2" FPT.
*1-phase motors are 115 or 230 volt, 3-phase are 230 volt
**Maximum flow rates will decrease with higher discharge pressure or heads.

Viton® is a registered trademark of DuPont Performance Elastomers.