High Capacity Thompson Filters, 2" MPT Ports, 100 Max GPM

These unique Thompson Strainer Systems feature a conical screen element that gives the filter a self-cleansing ability and the advantage of large screen area providing high capacities with low pressure loss. Debris is collected in a chamber below the screen for periodic flushing through a fitting in the bottom of the filter.

2" Models Feature:

304 Stainless Steel Housing (316 Stainless Screens)
Max 100 GPM
Pressures to 125 PSI
122 Sq. In. Screen Surface Area
1/2" NPT Debrish Flush Port
Filters include two 1/4" gauge ports.
Quick remove V-Band type clamp to secure the top Cover.
NPT threaded inlet/outlet ports.
2" and 3" Models Use an Internal Type 304 Stainless Steel Riser Pipe

Note: Side Flush Models are available as a Special Order.
Filters priced above have screens installed.

Part No.	Catalog	Description	Price
SKU: DUMLI2-16	Catalog:	Description: Thompson Filter/Strainer, 2" MPT Inlet / Outlet Ports, 16 Mesh Screen, 1-1/2" Cleanout	Price: CALL FOR PRICE
SKU: DUMLI2-30	Catalog:	Description: Thompson Filter/Strainer, 2" MPT Inlet / Outlet Ports, 30 Mesh Screen, 1-1/2" Cleanout	Price: CALL FOR PRICE
SKU: DUMLI2-D	Catalog:	Description: Thompson Filter/Strainer, 2" MPT Inlet / Outlet Ports, 40 Mesh Screen, Bottom Cleanout	Price: CALL FOR PRICE
SKU: DUMLI2-50	Catalog:	Description: Thompson Filter/Strainer, 2" MPT Inlet / Outlet Ports, 50 Mesh Screen, 1-1/2" Cleanout	Price: CALL FOR PRICE
SKU: DUMLI2-60	Catalog:	Description: Thompson Filter/Strainer, 2" MPT Inlet / Outlet Ports, 60 Mesh Screen, Bottom Cleanout	Price: $1,275.00 / EA	i h
SKU: DUMLI2-120	Catalog:	Description: Thompson Filter/Strainer, 2" MPT Inlet / Outlet Ports, 120 Mesh Screen, Bottom Cleanout	Price: CALL FOR PRICE
SKU: DUMLI2-200	Catalog: E0306	Description: Thompson Filter/Strainer, 2" MPT Inlet / Outlet Ports, 200 Mesh Screen, Bottom Cleanout	Price: CALL FOR PRICE
SKU: DUMLI2-250	Catalog:	Description: Thompson Filter/Strainer, 2" MPT Inlet / Outlet Ports, 250 Mesh Screen, Bottom Cleanout	Price: CALL FOR PRICE

Additional Information

The Thompson Filter's internal flow patterns are responsible for making our unique product so effective. As water flows up through the filter housing and deflects off the surface of the conical shaped filter screen, sediment is effectively forced back down, away from the screen, into the large debris reservoir. The sediment is then easily removed through the flush port. Effective separation of the water and the sediment is achieved while minimizing debris contact with the screen.

The Filter/Strainer vessel is purged while online and in operation. By opening a valve on the flush port, all debris in the lower reservoir is purged from the vessel, as shown. Backflushing or taking the unit off-line is not required to perform this flushing procedure.