Self-Priming Flomax 15 Centrifugal Pump, Stainless Steel, with Hydraulic Motor, 3" Flange Ports, .73 cu in. Motor Dispense/Rev, 15 GPM Motor Max Oil Flow, 2000 Max Oil PSI

FLOMAX® 15 hydraulic self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line. Pump bodies are 316 stainless steel with like construction stainless steel drive sleeves, fasteners, replaceable wear plates, and semi-open dynamically balanced impellers. A variety of double grease lubricated seal options are available for all types of abrasive and/or corrosive products, from clear water to caustic or abrasive liquids.

This FLOMAX® 15 hydraulic pump is available with a .73 cubic inch displacement gear motor with hydraulic flows ranging from 8 GPM to 15 GPM and hydraulic pressures ranging from 500 PSI to 2,000 PSI. Best performance with 2,000 PSI oil.

The FLOMAX® series of pumps are commonly used in Industrial, Agricultural and Marine applications, such as Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more!