Rotary Vane Pump, Low Flow, Brass, 4.4 Max GPM, V-Band, with Relief Valve, No Strainer

These pumps are available for V-Band clamp mounting to 48Y frame motors. This series of pumps are also standard with built-in relief valves preset a 170 psi. Viton® seals are standard. Nominal speed on all units is 1725 rpm

Model PO800: Brass Pump Body. Rated to 4.4 GPM and 200 PSI. Standard in "CO" style with V-band clamps. 1/2" FPT ports.
Viton® is a registered trademark of DuPont Performance Elastomers

Manufacturer:

SKU: PBPO801

VIEW CATALOG PAGE E0042

$160.00 / EA

Qty:

i h

Additional Information

Positive Displacement Rotary Vane Pumps: An excellent choice for handling clean fluids such as tire cleaners, presoak chemicals, spot-free RO water, foam brush solutions, oils, syrups, inks, dyes, acids, etc. Unique design handles liquids with low lubricating characteristics at relatively high pressures. Pumps should be protected from matter larger than 125 microns.

Pump Characteristics:

Viton® sealing parts for added chemical resistance (1300/1500/1600 & PO300 series)
Replaceable brass or stainless housings
Self-priming
Three-bearing design for pulley or direct drive
Carbon graphite internal vanes, bearings and liner provide no metal to metal contact for long life and quiet operation
Available with relief valves to protect against over pressure (1300/1500/1600 & PO300 series)
Mounting flanges for direct mounting to C-face motors or V-band mounting for "carbonator" motors with "y" frames
Maximum temperature is 150 Deg. F. (190 Deg. with special seals). Maximum viscosity is 500SSU.