Blog

Dultmeier Sales has recently acquired a contract renewal for the patented Brine Production System. The Kansas Department of Transportation recently finalized the contract for 20 new brine makers. While boasting the Easiest Cleanout on the Market, Dultmeier's Brine Production System also features:

 

• Full Clean-out in less than 10 minutes
• Use any standard loader bucket (8ft wide)
• High Capacity - 4000 to 6000 GPH Production Rate
• 6 Cubic Yard Hopper
• Heavy Duty Construction
• 10 Gauge Stainless Steel Hopper & Brine Tank
• 3" x 3/16" Stainless Square Tube Frame

 

The days of crawling inside a brine hopper and shoveling out the "waste" are over. Dultmeier Sales has engineered a design that allows a skid loader to pull under the hopper and unload the hopper completely in less than 10 minutes. The Brine Production System also allows for a user to automatically produce salt brine and quickly adjust the salinity of the brine, on the fly, with a manual valve. Salinity can quickly be monitored by the mounted salimeter.

One of the other beneficial features of this Brine Production System is that there are no computer components or circuit boards that will indefinitely fail - leaving the user dead in the water. The simplicity of this system is what also makes it extremely reliable - especially in crunch time.

Dultmeier has over 100 of these units throughout the Midwest including Nebraska Department of Roads (NDOR), Kansas Department of Transportation (KDOT), and Oklahoma Department of Transportation (OKDOT). Furthermore, this Brine Production System was highlighted with a product demonstration at the APWA Snow Conference in Des Moines, IA on April 23-25, 2017 and caught the attention of Iowa Department of Transportation.

Dultmeier Sales' Brine Production system will be on display at various North American trade shows. Any additional questions don't hesitate to contact Dultmeier Sales DeIce division at 1-800-228-9666.

Looking for that perfect fuel transfer pump unit? Look no further. We assemble these units in Omaha, Nebraska in our production facility. These fuel transfer pump units are available in either 1" transfer or 1.5" transfer capacity - flow characteristics vary drastically between the two versions.

The Dilemma & Our Solution for You

The 1" fuel transfer pump unit (DUFPU1P) will produce a flow rate of 32 GPM - at the nozzle. This is a true representation of the flow rate that the end user can expect - at the end of the plumbing system. While competitive systems will notate "max flow rate", many of them are portraying the flow rate the fuel transfer pump outputs at an open discharge. Open discharge means unrestricted flow and isn't an accurate representation of what an end user will experience, in terms of flow rate at the nozzle, once the fuel transfer pump is installed into a plumbing system. Here is a quick example of how friction loss is calculated through a plumbing system to determine flow rate - at the nozzle.

Our 1.5" fuel transfer pump unit will produce a flow rate of 60 GPM - at the nozzle. Most 12V diesel fuel transfer pumps will produce a flow rate of approximately 18-20 GPM at the nozzle. This is making the assumption the plumbing system consists of approximately 30 feet of 1" fuel transfer hose.

By making the transition from lower volume 12 Volt or 115 Volt fuel transfer pumps to the 1" DUFPU1P, end users can effectively decrease their fill times by 78%. If you choose to bump up to the, larger, DUFPU1.5P you can decrease fill times by 233%.

That is a serious cost savings when looking at the operational expenses of paying operators to wait around while large equipment fuel tanks are being filled. If you are able to save 15 minutes of fill time, per fill, how much money does that save you in a week? How about a month or a year?

Reduce waste, reduce cost, and increase efficiencies of your operation. Bigger, faster, stronger is the name of the game and these Dultmeier fuel transfer pump units will help you achieve that status.

Either fuel pump transfer unit option, that we manufacture, is fitted with the MP Pumps PetrolMaxx 2" self priming diesel fuel transfer pump. These fuel pump transfer units are designed to safely handle diesel or bio-diesel fuels and significantly reduce operating expenses and improve the efficiency of your operation.

Product Demonstration

Our, larger volume, DUFPU1.5P boasts the following features:

• CRX 6.5 HP manual start engine with C.A.R.B. rating.
• MP PetrolMaxx 2" self-priming cast iron pump with Type 21 Viton® mechanical seal designed for diesel fuel
• Hannay spring rewind hose reel
• Husky high flow automatic nozzle with swivel.
• Cimtek 1-1/2" 60 GPM fuel filter with 2-30 micron Hydrosorb elements,
• 38' of 1-1/2" fuel transfer hose and Husky 1690 1-1/2" high flow automatic nozzle.
• Mounted on steel base plate (powder-coat finish)

Here is a video to help further display the unit. Enjoy!

How do I match my pump rotation? This is a commonality that we address on almost a daily basis but many people do not understand how to accomplish this task. At Dultmeier Sales we are glad to help out and explain over the phone or you can get your answer right here:

First off, let's address how we look at a pump - the direction of rotation is always determined when FACING THE SHAFT. Centrifugal pumps are available in two options, either Counter Clockwise (CCW) or Clockwise (CW). To match the pump shaft with a drive shaft we always MATCH THE OPPOSITE ROTATION.

A gasoline engine will match up to a CW drive centrifugal pump. A front tractor crankshaft PTO rotates in CCW direction and therefore must be mated to a CW centrifugal pump. While a rear PTO shaft drive (CW rotation) application must be mated to a CCW pump. This is somewhat counter intuitive to those new to the concept but a "standard drive" centrifugal pump will actually be CCW rotation. Therefore, a "reverse" drive pump is actually CW.

 

Confused yet? Check out Ace Pumps description for further clarification along with pictures. A common symptom of not properly matching shaft rotation is no pressure generation by the pump. We receive calls from people describing that their brand new pump won't create any pressure and immediately point at the pump as the culprit. More often than not, it's not the pump's fault - generally there is an application error or human error causing the issue. In the scenario described above the first thing to confirm is that we have the correct pump shaft rotation matched with drive shaft choice. More often than not, this is the root of the headache. If you are still struggling give us a buzz and we will be happy to lend a hand.

 

Let us know if this was useful content. We certainly hope so. If there are other topics you would like addressed in future posts, by all means, let us know!

Be good out there.

Leading Poultry Producers have recently approved the patent pending design of the JBI Poultry Disinfectant Foaming Trailer. JBI Services partnered with Dultmeier Sales in early 2017 to transform this idea and design into reality.

KZ Valve is based out of Ashland, NE and was started by two brothers Keith and Kevin Ziegenbein. They two brothers created their first product, the Hydra-Halt, to be used on their family farm. The Hydra-Halt was an instant success as it replaced manual valves on fertilizer applicators with a new hydraulic remote control. Customers still preferred to have an electric valve. At the time, existing electric valves were solenoid type - not as dependable of a valve type the market demanded. Thus the electric ball valve was born - and KZCO was the first to introduce this new piece of equipment into the industry.

In 1982 the Electra-Halt was introduced. It took four years of research to get to the product release and it was well worth the investment of time and resources. The Electra-Halt revolutionized the industry and 10 years later in 1992 the Electra-Halt 2, or EH2 for short, was introduced. Since the inception of the EH2, it has evolved into thousands of new valve types, sizes, motors and wiring options.

Then in 1997, the EH3 and QC3 were added. This allowed KZCO to essential offer valve option configurations that touched the million mark. Over the years, KZCO has continued to expand its product line and offerings. Their engineering philosophy of "Form follows function, and price follows quality" continues to direct their overall goal to bring quality products to an ever-changing industry. KZCO recently celebrated their 40th Year Anniversary in 2016 and plan to continue their commitment of excellence and quality for many years to come. Don't hesitate to contact us should you have any questions about this amazing manufacturer.