Whether you are in the car wash industry or not, you may have noticed those plastic bags covering the windshield wipers of a car driving past you on the road. This may seem like an odd sight but there is a valid reason behind this anomaly.
What is a Wiper Bag?
A wiper bag is a protective covering specifically designed to shield windshield wipers during the car wash process. These bags are typically made from durable, water-resistant materials such as plastic or heavy-duty vinyl. They are easy to slip on and off and come in various sizes to fit different types of windshield wipers.
Why Put Bags on Wipers?
There are several key reasons why car wash operators and vehicle owners use wiper bags:
Protection of Wipers
Wiper bags protect the delicate rubber blades of the wipers from harsh chemicals, high-pressure water jets, and mechanical parts within the car wash. This ensures that the wipers are not damaged or worn out prematurely.
This is especially needed on rear wipers of vehicles. Soft cloth material in conveyor type car washes can get caught in the wipers and cause damage to the wiper and the brushes.
Prevent Streaking
Unprotected wipers can sometimes leave streaks or marks on the windshield after a wash. Wiper bags help avoid this by keeping the wipers clean and free from chemical residues.
Ensure Thorough Cleaning
By covering the wipers, the car wash system can focus on cleaning the windshield and the rest of the vehicle without interference, resulting in a more thorough and even wash.
Customer Satisfaction
For car wash businesses, using wiper bags demonstrates a commitment to quality and customer satisfaction. It shows that the business takes extra steps to protect the customer's vehicle, leading to higher customer trust and repeat business.
What Is the Most Common Wiper Bag Size?
Dultmeier Sales offers two different sizes of wiper bags in rolls of 500:
When setting up a soft wash system, you have lots of options when it comes to equipment. Selecting the right pump is one aspect that can make or break your entire setup. Softwash jobs require a balance of power to reach tall heights and low pressure to be gentle on surfaces.
The good news is that there are many options. The bad news is that all these options might have you feeling overwhelmed. Ultimately, any of these softwash pump options work. It comes down to your personal preferences and budget. So how about we get into the various softwash pump types and examine their pros and cons?
Pump Types Used for Softwash
A diaphragm pump is the most common pump type used in the softwash industry. The are different varieties in terms of the amount of flow and pressure they will achieve as well as the means used to power them.
12-volt and gas-engine-driven pumps are extremely common due to the mobile nature of the business. 110-volt, hydraulic, or air-driven can also be used if you have the means available, however, these often require more investment in additional equipment or access to electricity at the job site. In this guide, we are going to focus on the 12-volt and gas-engine pump options.
Another important factor is the material construction of the pump. Soft wash pumps need to be compatible with sodium hypochlorite solutions. The best materials for this application are polypropylene, Viton, Santoprene, and polyethylene.
12 & 24-Volt Soft Wash Pumps
Even if you are new to the softwash world, you will probably recognize this type of pump. 12-volt diaphragm pumps are extremely versatile and user-friendly. They are used in many different industries from RV's, marine, pest control, automotive, and more.
12-volt pumps come in a range of sizes. There are 12-volt pumps that can produce a maximum flow rate of about 7 GPM. The maximum PSI you can get from a 12-volt pump is about 700. However, you won't find one that delivers 7 GPM at 700 psi because 12 volts doesn't provide enough power to do so.
At higher pressure, these pumps are only capable of delivering a low flow rate, usually less than one gallon per minute. A 12-volt pump delivering 7 GPM will do so only at very low PSI. (We will get into the flow and pressure requirements needed for different jobs in the next section.)
24-volt diaphragm pumps operate the same as 12-volt diaphragm pumps but they generally offer higher flow rates and pressure, which means greater spray distance or reach.
Demand Pumps
The specific style of 12 & 24-volt pump used for softwash applications is a demand-style pump. A demand pump is designed to provide flow "on demand." This type of pump uses a pressure switch to automatically control the motor based on the pressure in the system.
When your spray wand trigger or valve is closed, the pressure builds up, and the demand switch shuts off the motor. When the trigger or valve is opened, the pressure drops, the switch deactivates, and the motor restarts, allowing liquid to flow again. This mechanism is used to help you conveniently operate your system without wasting battery or overheating your motor.
12/24-Volt Pump Pros & Cons
Pros
Inexpensive
Easy to replace
Quiet
No oil changes or re-fueling
Cons
Shorter lifespan relative to other diaphragm pump types
Repair costs often justify replacing the entire pump
Cycling pressure switch can burn out the motor and relay
When it comes to mobile softwash options, 12V, and 24V pumps are handy but have limitations in flow and pressure. This is where gas engine-driven pumps step in. Thanks to the increased horsepower of a gas engine, these pumps can deliver a much higher volume per minute and significantly greater PSI.
The enhanced volume and pressure mean you can achieve spray distances and heights far beyond what a 12V pump can offer. With the right plumbing and spray gun/nozzle combination, you can easily reach distances over 50 feet. This capability makes tackling larger jobs such as commercial buildings a breeze. You can effortlessly spray buildings over two stories high and reach rooftops.
Moreover, gas engine-driven pumps are more durable. They can be rebuilt and will last several years if properly maintained. They are a long-term solution for extensive softwash needs.
Engine-Driven Diaphragm Pump Pros & Cons:
Pros
Greater reach due to higher volume and pressure
More volume for larger jobs and taller buildings
Durable and repairable, equalling a longer lifespan
Cons
Requires regular oil changes for both the pump and engine
Probably the number one question you have is "What pump will help me spray two-story buildings, roofs, etc.". In other words, what is the spray distance of these different pumps?
It is crucial to understand that spray distance is not just a matter of your pump's size. The pump's flow and pressure specifications are the starting point. We can identify the potential reach from a particular pump, but the pump is not the only factor determining spray distance. The nozzle size, nozzle type, inside diameter of your hose, etc., will contribute to or detract from the effective spray distance of your softwash system.
There are two aspects of "pump size" to consider: the flow rate and the pressure it will produce. A pump needs to deliver enough flow that will allow you to cover an area quickly, but you don't want to overspend on a large pump if you don't need it. You also need the right combination of flow and pressure to propel your cleaning solution high enough to reach second-story walls and roofs.
With this in mind, we can pinpoint some common applications and the pumps that will work in those scenarios assuming you pair them with the proper equipment.
For more information on the accessories needed for effective softwash, you can view these pages on softwash spray guns and nozzles:
Recommended Pump Sizes for Common Soft Wash Applications
Residential Cleaning
Cleaning a two-story home requires a system to spray at least 20 feet in the air. And if you want to clean the roof as well, you're going to need more spray height than that. For these applications, you can rely on the 12-volt family of pumps that flow 5 GPM and reach pressures up to 100 PSI. Paired with the right nozzles and spray gun this pump will have no trouble reaching 30 feet or higher.
The Everflow SW5500 pump is specifically designed to be used with bleach and other types of disinfectant solutions. In addition to bleach-resistant materials, It features a motor shield that will shut off the pump if a leak is detected.
If you plan to do buildings that are taller than two stories and larger than a typical house, you may want to consider a gas engine-driven pump.
Large Surfaces: For cleaning large commercial buildings, parking lots, or extensive residential properties, a pump producing more than 5 GPM is recommended. The increased flow rate can significantly reduce cleaning time.
Multiple Users: If your setup involves multiple users cleaning different areas simultaneously, a higher flow rate pump will ensure that both operators receive sufficient solution pressure.
Selecting the right pump for your softwash system depends on your specific needs and the scale of your projects. 12-volt pumps are inexpensive and effective for residential jobs. If you plan to clean larger commercial buildings a gas-engine unit offers more flow and reliability but they are more expensive.
If you have questions or want to talk with someone about the softwash pump options available, give us a call
Tech Ag & Industrial Sales
Shane Blomendahl is a tech sales veteran at Dultmeier Sales with over 10+ years of experience in liquid handling products covering several industries and applications.
MP Pumps has been manufacturing quality centrifugal pumps for more than 80 years. Over this time, they have developed and improved upon their designs to offer reliable and affordable fluid-handling options for a variety of industries and applications.
There is almost certainly an MP pump that will work for you, but sorting through the various types can be tough. As a master MP Pumps distributor, Dultmeier Sales can help you pinpoint the right one. Here's a detailed look at the different MP Pumps available, their common uses, and the advantages and disadvantages of each type.
MP Pumps Company Overview
MP Pumps has been around since 1942, proudly crafting high-quality centrifugal pumps from their home base in Fraser, Michigan. They've got a pump for just about everything from making sure your fertilizer and ag chemical system runs without a hitch to keeping industrial processes flowing smoothly, to moving petroleum products efficiently.
MP Pumps has an extensive product line. They manufacture self-priming pumps, straight centrifugal pumps, chemical pumps, circulator pumps, petroleum pumps, and more.
Dultmeier Sales can supply just about any MP pump but we focus primarily on the ag, industrial, and petroleum pumps. These industries rely on the MP Flomax, Chemflo, and Petrolmaxx lines. One of the most common is the Flomax self-priming pump series, so let's start there.
MP Flomax
Description: These are self-priming centrifugal pumps. Available in materials like cast iron and stainless steel. Versatile, and capable of handling a wide variety of fluids. Many parts are interchangeable with other Flomax models.
Common Uses: The MP Flomax pump can be implemented in countless situations. Dultmeier Sales has been selling the Flomax series pump for use in agriculture for several years. Specifically, nurse trailer and sprayer tender truck transfer pumps, as well as fertilizer and agrochemical bulk plant pumps. They are excellent at handling water, agrochemicals, and fertilizer but they can be used with other liquids as well.
Key Features:
Capable of flows up to 750 GPM.
Handles pressures up to 230 head feet.
Stainless steel shaft sleeve for durability and corrosion resistance.
Self-Priming
Viton seals standard
Removable bolt-on FNPT flanges means your piping remains in place when servicing the pump
Wear plate can be replaced to extend the life of the pump
Suction check-valve holds liquid, protecting the pump seal when it re-primes
When it comes to connecting the pump to an engine or motor, MP offers the Flomax pump in two basic configurations. The pedestal version and the PumpPak version.
Pedestal: A pedestal pump is designed to be long-coupled to motors, or other drives. It features a bearing pedestal and solid shaft.
PumpPAK: This version of the Flomax pump is designed to be mounted directly to an engine or motor. There are versions to mount on gas-enines, hydraulic motors, and C-face electric motors.
Flomax Pump Sizes
Flow rate is always key for any pump type. There are Flomax pumps made to deliver up to 750 GPM:
The Flomax line is available in several materials. Pumps constructed with cast iron housings and impellers, stainless shafts, and Viton seals are most common. All stainless pumps are available for more corrosive applications.
Pump Drives
An MP Flomax pump can be driven a number of ways. Whether you require an electric motor, engine, or hydraulic motor. The pedestal pump version can be assembled on a baseplate with motor and long-coupled together. The PumpPak version can be mated directly or close-coupled to C-face electric motors or gas engines.
Various shaft sleeve sizes and bolt patterns are available so you can easily connect an MP pump to almost any C-face motor or gas engine.
If you would like a more detailed explanation of close-coupled and long-coupled pump units, be sure to read this guide to the best fertilizer pump options.
Chemflo Series
Description: Some liquids are more harsh on pumps than others. The MP Chemflo stainless steel pump family is built to withstand more severe applications and corrosive liquids. There are several different variations within this family to be compatible with different types of liquids.
Common Uses: Agricultural chemical mixing, fertilizer transfer, water treatment, de-icing liquids, and other industrial fluid transfer.
The Chemflo pump family is made up of more than 30 unique models. These different models are designed to be used in many different applications. They vary in flowrate, drive type, port size (flanged & NPT), etc.
Sizes
Chemflo pumps come in very low to high-flow options. Their CFX pumps have 1/2 to 1-inch ports with flow rates ranging from 10-40 GPM. The larger versions are available with 1-1/2 up to 3-inch ports and these pumps will provide maximum flow rates of 150-395 GPM.
Materials
One of the primary features of this pump series is the cast 316 stainless steel components used to construct the pump. While stainless is not an answer for 100% of liquids, it does offer resistance to the effects of a much wider range of liquids when compared to cast iron.
While the housing, impeller, and other components are made from stainless steel, the mechanical seal is available with a variety of options including Viton, EPDM, and Teflon. You can always refer to our chemical compatibility charts to evaluate which materials and elastomers will be compatible with the liquid you need to pump.
Drive Options
Like other MP pumps, the Chemflo series comes in a variety of setups included long-coupled pump and motor units, close-coupled pump and motor units, and hydraulic-driven units.
For more details and an explanation of close-coupled and long-coupled pump units, be sure to read this guide to the best fertilizer pump options.
PetrolMaxx Series
Description: Pumping fuels in high-volume applications requires the right type of pump for efficiency, compatibility, and safety. MP's PetrolMaxx series is a self-priming pump similar in design to the Flomax family but constructed with materials compatible with fuels. There are variations to ensure compatibility with diesel, biodiesel, gasoline, E85, and more.
Common Uses: High-volume fuel transfer. Loading and unloading bulk fuel trailers and trucks. Filling large equipment for construction and agriculture.
Key Features:
Self-priming
Available to mate directly to engines/motors or with a bearing pedestal for long coupling
Flow rates of 150-700 GPM
Options for Ethanol, Biodiesel, Gasoline, Diesel, and More
MP PetrolMaxx Options
For safety and compatibility, it's crucial to use the right pump for each type of fuel. That's why MP has created a variety of pump models designed specifically for different fuels. Each model is built with materials that match the unique properties of the fuel it's meant to handle, ensuring safe and reliable operation.
One of the most popular versions is made to handle diesel. Dultmeier sells hundreds of two-inch PetrolMaxx pumps driven by gas-engines for high-volume diesel fuel transfer. These pump units help fill equipment much faster than the common 12-volt fuel pumps. You can get flow rates well over 100 GPM with the right size hose and fuel filters.
As mentioned earlier, the PetrolMaxx family of pumps consists of several pumps fitted for specific fuels. The materials used include: steel, aluminum, cast iron, ductile iron, nitrile, 316 SS, Viton, Ni-resist, and more.
Drive Options
You can fit a PetrolMaxx pump to a gas-engine, electric motor, or hydraulic motor. It is important to note that some fuel types may require the use of an explosion-proof motor or gas-engine.
Dultmeier sales builds pump units on baseplates for easy installation. The units are available close coupled to electric motors or engines, and long coupled to electric motors. There is also a complete fuel unit with a hose reel, pump, fuel filters, fuel nozzle, and base plate.
MP Pumps has been a reliable supplier for years offering a wide range of pump solutions. Dultmeier sales has relied on MP as a competitively priced and durable pump for the rigors of the primary industries we have served. Including the fertilizer and ag chemical world as well as for de-icing, industrial, and fuel transfer.
Tech Ag & Industrial Sales
Shane Blomendahl is a tech sales veteran at Dultmeier Sales with over 10+ years of experience in liquid handling products covering several industries and applications.
Imagine being able to spray a large pasture and doing it without a large and cumbersome boom. With a boomless sprayer, you can do just that!
With no boom to negotiate around obstacles, a boomless sprayer is a convenient way to cover large areas. However, it is not suited for every type of application. Today we're going to break down the ins and outs of boomless sprayers. We will explain specifically what they are, how they operate, and when you should use them.
What is a Boomless Sprayer?
A "boomless" sprayer is designed to distribute liquids, such as herbicides, pesticides, and fertilizers, without the traditional long, horizontal boom. Instead, these sprayers use specialized nozzles to achieve wide coverage without the extensive boom. This offers several advantages.
A conventional sprayer boom has long arms extending from the sides of a sprayer that hold several nozzles at set intervals, providing a uniform application over a wide swath. In contrast, boomless sprayers use one or more "boomless" nozzles that are mounted at the rear of a sprayer. These nozzles can cover a similar span in one pass as a conventional boom.
Conventional Boom vs Boomless Setup:
Common Applications of a Boomless Sprayer
Boomless sprayers have gained popularity due to their unique advantages over conventional boom sprayers. They are particularly useful in areas with obstacles, uneven terrain, or narrow paths where maneuverability and flexibility are crucial. The absence of a boom reduces the risk of damage to equipment and surrounding fences, buildings, etc. This makes boomless sprayers a practical choice for farmers, ranchers, turf care pros, and property managers.
Boomless sprayers can be used for several applications:
Pasture spraying: Ranchers can spray areas of their pastures that are hard to access with a large spray boom. It allows you to spray steep hillsides, ravines, and fence lines.
Landscaping: Landscapers benefit from the flexibility of boomless sprayers when maintaining large lawns, parks, and golf courses. Without a boom, it is much easier to navigate around trees, bushes, and other landscape features making it an efficient tool for maintaining green spaces.
Forestry: In forestry management, boomless sprayers are employed to apply treatments over large, wooded areas. Their ability to cover wide swathes of land quickly and effectively helps in pest control and vegetation management.
Golf Course: Spraying Greens from the fringe.
Municipal and Public Works: Municipal workers use boomless sprayers for tasks such as roadside weed control and maintaining public parks. The ease of use and wide coverage make them suitable for maintaining large public spaces.
Food Plots: Many boomless sprayers can fit on ATVs and UTVs making them perfect for spraying remote food plots for wild game.
Boom Extending: Used as the last nozzle on a conventional boom to extend reach, spray fence lines, waterways, etc.
This video demonstrates what a boomless nozzle looks like in action on the end of a sprayer boom:
A boomless nozzle has a unique design that projects fluid over a wide area. Inside the nozzle housing, a vane or diffuser breaks up the stream of fluid so that droplets are formed across the entire width of the spray pattern.
With a typical spray nozzle that projects fluid over a great distance, the stream stays together as it travels through the air-only dispersing into droplets in an isolated area. A boomless nozzle both projects fluid over a great distance but also provides coverage of the surface along the entire swath.
The design is rather ingenious and the only difference between a traditional boom sprayer and a boomless sprayer is the lack of a boom. In terms of the tank, pump, and controls, you can design and operate a boomless sprayer basically the same as other sprayer types.
Pros and Cons of a Boomless Sprayer
While a boomless sprayer is very effective in the right application, there are specific scenarios where it is not the best option.
Due to the high-volume, wide-angle spray pattern, a boomless sprayer nozzle produces very coarse droplets. While these coarse droplets are less prone to drift, they do not offer the same consistent coverage as a conventional boom.
Boom Sprayers
Pros:
Precise and uniform application
Suitable for large, open fields
Consistent spray pattern and coverage
Cons:
Difficult to maneuver in tight or obstructed areas
Risk of boom damage from obstacles
Requires more careful navigation and operation
Boomless Sprayers
Pros:
Flexible and versatile coverage
Easy to maneuver in irregular and obstacle-rich areas
Reduced risk of equipment damage
Cons:
Potential for less uniform coverage compared to boom sprayers
The spray pattern may need adjustment for different applications
May not be as effective in large, open fields where precision is critical
Boomless Nozzle Types
There are several different manufacturers of boomless sprayer nozzles. While they do vary in design and exact specifications, the basic premise is the same. They are available in stainless steel or poly material. Boomless nozzles range in both the volume of liquid they will deliver and the width of the spray pattern they produce. There are small nozzles that spray a 3-5 ft pattern up to larger nozzles that will cover nearly 40 ft in one direction.
Generally, a boomless sprayer will consist of two boomless nozzles installed "back-to-back" on a sprayer about 6 inches apart depending on the exact nozzle. The standard boomlesss nozzles have a slight "kickback" so they overlap when mounted in this manner.
This is the nozzle you would use on the back of a sprayer in place of a conventional boom. With each nozzle acting as half of the sprayer swath. You can control these nozzles individually, giving you the ability to control whether you spray to the left, right, or full pattern.
There are two varieties of this nozzle. They perform the same the only difference is in the direction of spray in relation to the inlet port. Most of these nozzles have an NPT inlet and the outlet is either opposite this inlet or perpendicular.
There are also boomless nozzles that will cover a full swath with one spray nozzle. These full-pattern nozzles are offered by Boominator and Teejet.
Full pattern boomless nozzle.
TeeJet also offers a BoomJet boomless assembly that consists of multiple nozzles mounted on one body. Together they can cover a wide area with even coverage
Finally, we have the popular roadside or right-of-way boomless nozzle. This nozzle is similar to the standard types; however, it has a significant distinction. Roadside nozzles do not have a "kickback" to their pattern. These nozzles are not intended to overlap with another nozzle. Instead, they are mounted on the side of a truck or other vehicle to spray road ditches, medians, or any area adjacent to the vehicle. With no "kickback", there is no liquid sprayed on the vehicle.
The roadside nozzle pattern does not feature a kickback for overlap
No matter what type of boomless nozzles you use, it is crucial to mount them correctly. Incorrect mounting can limit your coverage and lead to poor results. Here are the basic guidelines to follow when you mount different types of boomless nozzles:
Boomless Nozzle Height
The vast majority of boomless nozzles are intended to be mounted and used at a height of 36 inches from the ground. Most will perform at a minimum height of 18 inches from the ground and a maximum of about 48 inches. Changing the height does result in slightly narrower or wider coverage.
There are boomless nozzles that can be mounted lower than 18 inches off the ground. Boominator short pattern nozzles cover a narrower spray distance of about 3-10 ft. You can mount them 12 inches from the ground.
Boomless Nozzle Spacing
A pair of boomless nozzles on a sprayer should be mounted about four inches apart. This ensures an overlap between them. Nozzles mounted higher than 36 inches may adequately overlap at 6 inches or more, but the nozzle angle may need to be adjusted up or down.
Boomless Nozzle Plumbing
Boomless nozzles deliver more fluid per minute than flat fan nozzles on a spray boom, so they require an adequately sized hose to feed them. If you are using a single nozzle, it is best to use a hose or pipe with an inside diameter larger than the nozzle inlet. If you are feeding two nozzles, then the hose should be double the inlet size of the nozzle inlet. This is especially important if you have a long length of hose between the pump and the nozzles.
You can refer to the manufacturer's website for more specific boomless nozzle plumbing and installation instructions:
Question: What is the farthest a boomless nozzle can spray?
The widest swath you can cover with a boomless sprayer would require using two standard Boom Buster 504 nozzles. Each one can spray about 40 feet in one direction. With two of these mounted "back-to-back", you could potentially spray a width of 80 ft.
Question: Can I add a boomless nozzle to my sprayer?
Yes, a boomless nozzle can be added to basically any sprayer type. It is important to make sure your sprayer has a pump large enough to provide the flow needed for the nozzles you choose.
Question: Do Boomless Sprayers Work Well?
A boomless sprayer works extremely well in the right scenario. They produce coarse droplets that are less prone to drift and are perfect for fertilizers, orchard spraying, de-ice, pasture spraying, and much more. They excel in areas with obstacles.
They are less suited for applying herbicides that require thorough coverage of the target surface. If you need nozzles that produce finer droplets see our selection of flat fan sprayer nozzles.
Question: How much volume can a boomless nozzle spray?
Boomless nozzles come in various sizes. The smaller nozzles can produce a flow of about 1-2 gallons per minute. At 2 GPM and a 30-foot spray width, this amounts to about 12-13 gallons per acre at 5 mph.
You can pinpoint the exact gallon per acre rate at different speeds in the boomless nozzle chart for each type.
Boomless Nozzles Options
There are quite a few options and the distinctions between them may seem arbitrary so here are the options we carry and some of the key benefits of each type.
TeeJet
BoomJet - Solid brass unit that is very durable and provides even coverage.
XP Boomjet - A cost-effective poly nozzle that is lightweight and easily added to Teejet Quickjet nozzle bodies with a Teejet 1/4 cap.
Boominator
Boominator nozzles provide several different patterns that are made of durable stainless steel:
Unlike other types of boomless nozzles, Boom Buster nozzles do not have a "left" and "right" hand version. Any two nozzles can be used in tandem to create a full pattern.
Golf Course Boomless Green Sprayer - Solenoid control and mounting kit for golf course sprayer booms, can be used on other sprayer types.
We have several of these in stock and we can ship them out the same day you order. Do not hesitate to get in touch with us if you need any help choosing the right boomless nozzle for your sprayer.
Tech Ag & Industrial Sales
Shane Blomendahl is a tech sales veteran at Dultmeier Sales with over 10+ years of experience in liquid handling products covering several industries and applications.
In the world of cleaning, high-pressure nozzles play a crucial role in delivering the power and precision needed to tackle tough jobs. Whether pressure washing a driveway, detailing a car, or performing industrial cleaning, the right high-pressure nozzle can make all the difference.
These nozzles are designed to enhance the effectiveness of your cleaning equipment by focusing water pressure into a powerful stream, capable of removing dirt, grime, and stains that would be impossible to eliminate with ordinary nozzles. They are typically constructed from stainless or hardened stainless steel to withstand high pressures.
Here's a comprehensive look at what you need to know about high-pressure nozzles.
High-Pressure Nozzles Applications
Most nozzles are rated to working pressures up to 4,000 psi, but higher-rated nozzles (up to 10,000 psi) are also available for more intense cleaning needs. Different pressure ranges are required to tackle the various cleaning tasks. It is important to identify the proper operating pressure for your scenario and size the nozzle accordingly.
Here are some common applications and the general pressures required:
Pressure Washing
From driveways and sidewalks to commercial buildings and heavy equipment, pressure washing relies on high-pressure nozzles to deliver targeted cleaning power. These nozzles help remove stubborn dirt, mildew, and other contaminants.
In the automotive industry, high-pressure nozzles are essential for achieving a spotless finish. They are used in both automatic car washes and self-serve bays to apply foam, rinse off detergents, and remove dirt without damaging the vehicle's surface.
Factories, warehouses, and other industrial settings require heavy-duty cleaning solutions. High-pressure nozzles are often used in automated cleaning. They can be fixed to a machine or apparatus that is part of an industrial process to clean, strip, or prepare surfaces. Ideal for cleaning machinery, floors, walls, and other surfaces that accumulate grease, oil, grime, and other residues.
Machinery Cleaning: Typically, 2,000 to 5,000 PSI to remove grease and grime.
Paint Stripping: Around 5,000 to 10,000 PSI to effectively remove paint from surfaces.
Surface Preparation: Up to 10,000 PSI (or even more in some cases!) for tasks like removing coatings, rust, or other surface contaminants before applying new coatings or treatments.
The benefits of using the right high-pressure nozzle for specific tasks cannot be overstated. Selecting the appropriate nozzle ensures:
Efficiency: The correct nozzle maximizes cleaning power and reduces the time needed to complete a task.
Safety: Using the right nozzle minimizes the risk of damage to surfaces.
Cost-Effectiveness: Proper nozzle selection can extend the life of your cleaning equipment and reduce the need for additional cleaning agents.
To identify the right nozzle for your needs there are several things to consider in addition to the pressure rating of the nozzle. These include the spray angle, pattern, material, flow rate, and other nozzle features such as stabilizing vanes and rotating turbines.
Understanding Spray Angles and Patterns of High-Pressure Nozzles
The spray angle of a nozzle determines the coverage pattern and effectiveness at various distances from the surface. Common spray angles include:
Zero Degree: Provides a concentrated, powerful spray for tough cleaning tasks. All fluid is directed in a narrow stream that impacts the surface in a very small area. Excellent for cutting through surfaces.
15 Degree: Offers a narrow, but slightly wider spray pattern; common for pressure washing and industrial cleaning.
25 Degree: Delivers a wider spray pattern, ideal for car wash and truck wash operations.
40 Degree: Provides the widest common spray pattern, excellent for general cleaning tasks.
A nozzle with a narrower spray angle will deliver more impact than a wider fan. So it is important to identify a good balance between the impact you need and the fan angle desired. Often the best way to determine this is by testing some different angles in your application, but knowing this can provide a good starting point.
Sizing a High-Pressure Nozzle
In addition to the spray angle, you need to determine the nozzle size for your application. The orifice size of a nozzle affects the flow rate (measured in gallons per minute, GPM) through the nozzle.
Nozzles are sized based on their flow capacity at 4000 PSI. In other words, how many gallons will flow through the tip/orifice of the nozzle at 4000 PSI? For example, a #4 nozzle will flow 4 GPM at 4,000 PSI. A #3 nozzle will flow 3 GPM at 4000 PSI.
This chart shows the flow capacity of each orifice size at various pressures:
Identifying your nozzle size requires that you know the parameters of your system and size a nozzle accordingly. Let's look at an example: a pressure washer that delivers 3 GPM at 2000 PSI. Using the chart, you can find 2000 PSI at the top and follow the column down until we get to 3 GPM. Then we can follow the row left to the nozzle size column on the far left of the chart. This shows us that a 4.5 nozzle or orifice size will flow 3 GPM at 2000 PSI.
This nozzle will work for the system in our example, but it is a good rule of thumb to select a nozzle size slightly smaller than what you find in this chart. In this case a #4. This will provide some bypass and allow for nozzle wear over time without a decrease in pressure.
If you are unsure of any aspect of nozzle sizing, you can always get in touch with our high-pressure cleaning team!
Nozzle Features
While spray pattern and nozzle size are the two main factors you must consider, there are other nozzle features and attributes to keep in mind.
Internal Stabilizer Vanes: Some nozzles come with internal stabilizer vanes which create a more defined spray pattern. These are particularly useful in industrial or process cleaning where precision is a necessity.
Rotating Nozzles: High-pressure rotating nozzles or Turbo Nozzles have an internal turbine that creates a rotating stream that vastly improves efficiency when compared to flat fan nozzles.
Pipe Thread Sizes: High-pressure nozzles are usually available in 1/8" or 1/4" male or female pipe thread sizes, making them compatible with existing wands, arches, or other cleaning equipment.
Quick Coupler Nozzles: Designed to fit 1/4" quick coupler fittings, allowing for easy change out or removal.
By choosing the right nozzle, you can maximize cleaning efficiency and ensure that your equipment operates at peak performance.
Conclusion
High-pressure nozzles are a key component in effective cleaning systems. Understanding their types, features, spray angles, and orifice sizes can greatly enhance your cleaning results. Always ensure you're using the right nozzle for your specific application to achieve the best performance and longevity from your equipment.
We all know the key role fertilizer plays in crop production. Handling large volumes of these vital plant nutrients requires the right transfer equipment. At the heart of every fertilizer transportation system is the pump. Whether it is unloading rail cars or filling the tanks on your planter, the type of pump you use has an impact on your ability to run your operation smoothly.
In this guide, we'll dive into the various types of fertilizer pumps. We will also look at the specific characteristics and attributes that hold up to the rigorous nature of transferring fertilizer.
Understanding Fertilizer Transfer Pumps
The primary pump type used for high-volume transfer of fertilizers is a centrifugal pump. Known for their simplicity and effectiveness, They are ideal for any scenario where the goal is to transfer fluid as quickly as possible. In other words, high-volume transfer scenarios such as loading or unloading semi-tankers, emptying rail cars, loading sprayers, applying liquid on fields, etc.
Now, centrifugal pumps are not the only pump types used to handle fertilizer. There are many different positive displacement pumps used to apply fertilizers on planters or toolbars, and there are gear pumps used for some more viscous products, but centrifugal pumps are the primary choice for high-volume transfer.
Advantages of Centrifugal Pumps for Fertilizer:
Simple
High-flow
Easy to repair
Durable
Disadvantages of Centrifugal Pumps for Fertilizer:
Low pressure relative to other pump types
May not handle really heavy or viscous products
Cannot be run dry unless they have a lubricated seal
How Fertilizer Transfer Pumps Work
Before we get to the dirty details of fertilizer pump selection, it is worth your time to get familiar with the basics of centrifugal pumps. Especially, if you aren't familiar with them or need a quick refresher. If you want to jump straight to pump selection, click here to jump ahead.
In order to gain a thorough understanding of how a centrifugal pump works, we should first look at the main components. These are the housing, the impeller, the shaft, and the shaft seal. Depending on the specific type of pump and the design there may be other components like a pedestal, volute, bearings, etc., but these are the main pieces that make up all centrifugal pumps.
Basic Components of a Centrifugal Fertilizer Pump:
Housing
Volute
Impeller
Shaft
Seal
Gasket
Pedestal/Adapter
A centrifugal pump operates by using centrifugal force to move liquid. The impeller, mounted on the shaft, is driven by a motor or engine. As the shaft rotates, the impeller also rotates. The rotation of the impeller creates centrifugal force, which pushes the liquid inside the pump away from the center (the eye of the impeller) towards the outer edges
Pump Curves
Variations in pump construction result in different capabilities, such as flow rate, head, horsepower, and efficiency points. These differences arise from the various pump sizes, the shapes of the pump volute, as well as the sizes and designs of impellers. These factors alter the pump curve, which represents the pump's performance based on discharge plumbing parameters.
All these different variations mean that it is important to look at a pump curve when choosing a pump and not just physical attributes such as the port size or horsepower. Those alone don't tell the whole story.
A pump curve is a graphical representation that shows the relationship between the flow rate and the head (pressure) of a pump. It illustrates how a pump performs under different conditions, helping users determine the best operating point for efficiency and effectiveness. By understanding the pump curve, you can select the right pump and the horsepower needed for your specific application, ensuring optimal performance and energy savings.
How to read pump curves
For more detailed information on centrifugal pump operation and pump curves, be sure to read this detailed guide on centrifugal pumps written by Tom Hansen, Head Engineer at Dultmeier Sales.
Selecting a Fertilizer Pump
Now that we have a solid understanding of how a centrifugal pump operates, Let's look at the different aspects you should consider when choosing the right one for your needs.
Straight Versus Self-Priming
While there are many variations and different designs, all centrifugal pumps fit into two main categories: straight and self-priming. Both of these types operate on the same basic principle, using centrifugal force to move liquid. They differ in their ability to maintain liquid inside the pump. This is an important factor to consider when you select a pump so let's examine this a bit further.
Self-priming pump
A self-priming centrifugal pump can pull liquid from a level that is below the pump inlet (assuming it is properly primed initially). This is achieved via a combination of the design of the volute and suction created by the pump. A self-priming pump is designed to store fluid in the housing even after it stops running. Thus keeping the pump seal protected when it is started again and it begins to prime.
Priming is important because a standard centrifugal pump requires liquid in it at all times to lubricate the shaft seal. I say standard because there are centrifugal pumps that can be run dry but more on that later.
This video thoroughly explains the principles of pump priming:
Self-priming pumps are often used as transfer pumps to load and unload sprayers or nurse tanks. They provide more flexibility in this scenario because they do not have to be installed lower than the tank outlet. This means they can be installed almost anywhere on a truck or trailer and pull liquid from the tank.
Straight centrifugal pump
A straight centrifugal pump will also create suction the same way that a self-priming pump does, however, due to the design of the pump volute, they do not store liquid. The inlet of the pump must be gravity-fed so that the pump is not operated without liquid. If the pump inlet is not gravity-fed (flooded suction), You can use a check valve or foot valve in the suction line to trap fluid in the pump. This will protect the seal from cavitation when it starts again.
These pumps are generally more efficient than self-priming pumps. They are simpler machines, with impellers and casings designed for hydraulic efficiency. Self-priming pumps, on the other hand, have additional features like a priming chamber that can create turbulence and energy loss, making them less efficient.
A straight centrifugal pump uses most of its energy for pumping, whereas self-priming pumps must expend some energy on the priming process, reducing their overall efficiency.
Straight centrifugal pumps are very common in scenarios where the pump is going to be permanently installed with a flooded suction port:
Bulk transfer from large storage tanks
rail unloading, etc.
onboard sprayers
planters
fertilizer toolbars
Choosing between a straight centrifugal pump and a self-priming centrifugal pump depends largely on your specific application needs. Self-priming pumps are versatile and work for many applications, but if you want efficiency and the pump will have flooded suction, then a straight centrifugal pump is generally the best way to go.
Types of Fertilizer Pump Drives
Another aspect to consider when selecting a centrifugal fertilizer pump is the means you will use to drive it. A pump can be driven any way you want as long as you have enough horsepower to handle the application.
Common centrifugal pump drive types used for fertilizer transfer:
Electric Motor
Hydraulic Motor
PTO Driven
Gas-Engine
Electric Motor Units
Electric motor-driven units are the most common drive type in fertilizer facilities. There are two different pump and motor unit styles: close-coupled and long-coupled. As the name suggests, a close-coupled is where the pump is directly bolted to the electric motor. Long-coupled pump units are connected with a set of couplers.
A close-coupled pump unit is a much simpler design that has many benefits. Both self-priming and straight centrifugal pumps can be coupled with a C-face motor. Pump manufacturers build pumps with motor adapters to mate with several different electric motor frame sizes.
Although they are more complex and expensive, long-coupled units have many benefits. They typically consist of a baseplate, a 3-piece flexible coupling, and the pump and motor. Pumps used for long coupled units are called pedestal pumps. This indicates that they have a bearing pedestal with a solid shaft.
Pros:
Design protects motor bearings from leaks
Flexibility for more pump and motor combinations
Cons:
Requires precise alignment
Can be more expensive due to baseplates and couplers required
Consider Chemical Compatibility
Compatibility is a crucial factor to consider. As you know, fertilizer is a broad term encompassing several different liquids used to improve plant growth. Most of these products possess properties that lead to rust, corrosion, and friction wear on pump components.
Centrifugal pumps can be constructed using various types of materials. Due to the wide variety of chemical properties of the different fertilizers, there isn't one material that works best for all of them. It is important to look at individual products to determine the best material to use.
Common Fertilizer Pump Materials
Although no material will handle all types of fertilizers, there are some that work with common fertilizers such as 10-34-0 or 32% nitrogen. For these products, we recommend polypropylene or cast iron pumps with Viton mechanical seals. Stainless steel is another material that will work with a broad range of fertilizers, but due to the cost, it is only used when necessary.
If you are not sure what materials are best suited for the type of fertilizer you use, you can refer to our chemical compatibility charts or call us for help. Our years of combined experience give us a good idea of what materials should be used with different products.
Regardless of pump type, it is recommended to drain corrosive liquid from the pump and fill it with a non-corrosive liquid such as crop oil or RV antifreeze. This will significantly prolong the life of cast iron pumps.
Choosing A Seal Type
No matter what type of centrifugal pump you are using, the shaft seal is the most important component to understand. The seal provides a barrier keeping liquid in the pump as the shaft rotates.
There are different types of seals used in centrifugal pumps, but the most common we see used with fertilizer is a mechanical seal. This type consists of two seal faces, an elastomer, and a spring:
Rotating Seal Face: Attached to the pump shaft and rotates with it.
Stationary Seal Face: Fixed to the pump housing and remains stationary.
Elastomer: keeps the rotating pieces tight on the shaft.
Spring: Pushes the two faces together to maintain a tight seal
Each seal face is smooth and consists of durable materials such as silicon carbide, carbon, or ceramic. The seal elastomers can be Buna, EPDM, Viton, or other material that is compatible with the fluid your are pumping. While the pump is operating a small amount of the fluid being pumped forms a barrier between these two seal faces. This lubricates the seal and provides a barrier that keeps the pump from leaking around the shaft.
Viton® mechanical seal assembly
Without liquid in the pump housing, a standard mechanical seal can fail because it is not lubricated. This is called "running a pump dry". The two faces rub together creating friction that will harm the seal face or crack it all together. Even slight damage to the seal face can result in a leak.
Using a pump with a lubricated seal or double seal assembly can prolong seal life. These mechanisms keep the shaft seal of the pump lubricated with antifreeze or grease. This adds protection in situations where the pump might run dry, like unloading trucks or storage tanks. Any situation where a tank is emptied or prime could be lost.
Pressurized wet seal assembly on fertilizer pump & motor unit.
If your pump will be installed in a scenario where it could be running dry or you don't want to risk seal failure in the middle of your busiest season, a double seal or lubricated seal is your best option.
Pump Size
When we say pump size, we are talking about flow rate. The amount of liquid you need your pump to move in a given amount of time is important, but determining what pump will deliver your needed flow rate can be tricky.
The flow rate in centrifugal pumps is closely tied to the discharge head. An increase in discharge head leads to a decrease in flow rate, and vice versa. Understanding this relationship is essential for selecting and operating these pumps, as it directly affects their performance in various scenarios.
Of course, no two scenarios are the same so let's explore how you can go about sizing a fertilizer pump for a specific application.
Sizing A Fertilizer Transfer Pump
First, you need to consider the specific fertilizer you are going to be moving as well as the plumbing layout. This process involves gathering some information, here are the basic steps:
Determine Desired Flow Rate: Calculate the required flow rate in gallons per minute (GPM). Consider the application, are you filling tanks? Unloading trailers? How quickly do you want the load/unload process to be completed?
Identify Your Fertilizer Properties: Determine the viscosity and density of the fertilizer.
Calculate Total Head (TDH): Determining the total discharge head of a pump involves calculating the total head or pressure that the pump needs to overcome to move the fluid through the entire system. If you have plumbing in place already, consider any restrictions such as elbows, valves, strainers, meters, vertical pipes, etc. For more details, you can read this guide that further explains total dynamic head.
Identify Pump: Once you know your flow rate and TDH, you can identify a pump that can achieve your desired GPM given your plumbing setup. This requires examining the pump curves of different models to find a suitable option. The pump curve will offer insights into the most efficient option and the required horsepower for your application.
The total dynamic head, the pump design, and flow rate, combined with the viscosity and weight of the fertilizer will determine how much horsepower is required. Determining pump flow rates and horsepower requirements is a complex matter. If you have questions or just want us to walk through this process, you can give us a call any day and we can help you determine the pump and motor size you need.
Final Takeaways
Choosing the right fertilizer pump is crucial for efficient and smooth operations. By understanding the advantages and disadvantages of different pumps and the specific needs of your application, you can make an informed decision.
Remember to consider factors such as pump type, drive methods, material compatibility, seal types, and proper sizing to ensure optimal performance and longevity of your equipment. Investing time in selecting the appropriate pump will ultimately lead to better handling of fertilizers, increased productivity, and cost savings in the long run.
There are many, many different options for fertilizer pumps, so do not hesitate to reach out to us if you need some guidance selecting a pump!
Tech Ag & Industrial Sales
Shane Blomendahl is a tech sales veteran at Dultmeier Sales with over 10+ years of experience in liquid handling products covering several industries and applications.
Selective catalytic reduction is an advanced process that is intended to minimize pollution from diesel engines and contribute to better air quality. Diesel exhaust fluid, or DEF, is central to this process.
If you use modern farm or construction equipment you are well aware of the regulations that require the use of DEF. Although DEF is a simple liquid, consisting of urea and water, it does have unique properties. So for those who need to fuel equipment, the question arises what kind of pump do I need for DEF?
In this guide, Will will be looking at the properties of DEF to understand what types of materials are compatible with it. We will also take a look at the different DEF pump options and accessories.
Understanding What Pump Types Are Suitable for DEF
The most important thing to consider when selecting a pump for DEF is material compatibility. There are other factors to consider such as flow rate and drive type, but this is most important. Let's look at the materials that work for pumping DEF and the types of pumps that will work.
Material Compatibility
Diesel Exhaust Fluid (DEF) is a solution made up of 32.5% urea and 67.5% deionized water. DEF is non-toxic, non-flammable, and non-hazardous under normal conditions. However, DEF is not compatible with most metals and some plastics. This limits the pumps that are suitable to be used with it.
How important is this really? What is the worst that can happen if you use just any old pump? Simply put, it may work for a very short period but it won't be long before you have issues. DEF decomposes into ammonia, which corrodes incompatible metals like copper, zinc, and aluminum. It causes pitting, erosion, oxidation, and galvanic corrosion, weakening metal and leading to rapid component damage.
So what materials do work with DEF? Stainless steel (grades 304 and 316), polyethylene, and polypropylene are resistant to the effects of DEF. Therefore manufacturers use these materials to construct pumps suitable for DEF. The seals and gaskets used for DEF pumps are EPDM or Viton.
Material suitable for handling DEF:
Polypropylene
Viton
EPDM
Stainless Steel
Pump Types for DEF
Although the materials suited for DEF are limited, there are several different types of pump that will work fine for DEF fluid. Centrifugal pumps, diaphragm pumps, gear pumps, and even submersible pumps. Again, the type is not as important as the materials and elastomers used to construct the pump.
Centrifugal pumps are most common for large volumes, and diaphragm pumps are used for dispensing into vehicles and equipment. Diaphragm pumps for DEF will generally come as a kit that includes the hoses, nozzles, and couplings needed for DEF barrels or other pre-packaged containers (more about this in a moment).
Centrifugal Pumps
Diaphragm Pumps
Submersible Pump
Pump Drive Types for DEF
A variety of drive options can be used for DEF Pumps. Electric motors, gas engines, hydraulic motors, air-driven pumps, and more. No matter what kind of power supply, you can find a pump that will work for you.
Electric
Gas-engine Driven
Air Operated
DEF Pump Couplings
Many DEF tanks and containers utilize Micromatic RSV valves and couplings. These couplings are designed to prevent contamination of DEF. They have a dry-break mechanism that minimizes the exposure of DEF to the environment during connection and disconnection, maintaining the purity of the fluid
These couplings also help to eliminate drips or spills. Even a small amount of DEF fluid can corrode metals, so the dry-break feature is vital to protect any equipment around your DEF pump and tank.
RSV Coupler
RSV Drum/Tank Valve
RSV couplings are the same type of couplings used on beer kegs and other chemical containers. There is a valve in the tank or drum, and there is the coupler on your pump or suction hose.
There are two different types of Micromatic couplers: 3-key and 4-key. The reason for this difference is to prevent cross-contamination of equipment. For example, it prevents you from coupling a DEF pump to a tank containing some other chemical.
How to Connect the Micro Matic RSV Dispense Coupler
DEF Pump Options
Due to the specific applications and the limited materials that are compatible with it, manufacturers have designed pumps and pump units specifically for DEF. There are 12-volt options available for mobile applications as well as stainless steel centrifugal pumps for bulk transfer.
Understanding that DEF is only compatible with certain materials, you must be careful when selecting a pump, but then you have to piece together a hose, nozzle, meter, and tank that is compatible. This is time-consuming and nerve-racking if you are not certain that an item will work with DEF.
DEF pump manufacturers understand this and offer comprehensive solutions. There are several DEF pump kits that include a pump, hose, RSV coupler, and all the other appropriate fittings needed. These kits are often designed to hang off an IBC tote or 275-gallon shuttle. Some of these kits will even include a tank.
Your pump's compatibility with DEF is vital, as are the accessories you use to handle it. Here are some essential accessories to consider and the types that work with DEF:
DEF Tanks
Polyethylene and stainless steel are the best materials for DEF storage. Poly is much more affordable. You can use just about any poly tank but you will want to ensure that the tank is properly sealed up and equipped with dry-break couplers to preserve the purity of your DEF.
As mentioned earlier RSV couplers are the common method to ensure closed system transfer. These can be added to a tank if you do not have them. The RSV tank valves are made to fit into different thread types. If you use a 275-gallon IBC tote/Cage tank, you can replace the lid with one that will fit an RSV coupler.
EPDM rubber is the preferred hose to use for DEF. Hose fittings should be either polypropylene or stainless steel. There are also poly and stainless hose reels designed to handle DEF.
DEF is a uniquid fluid with properties that dictate that you use the right type of pump and accessories to handle it safely. Fortunately, the pumps that work with DEF are clearly designed to do so. If you have questions about whether or not a specific product will work for DEF let us know.
Tech Ag & Industrial Sales
Shane Blomendahl is a tech sales veteran at Dultmeier Sales with over 10+ years of experience in liquid handling products covering several industries and applications.
Injecting a liquid into a center pivot is an effective way to deliver nutrients to crops later in the growing season. Getting a fertigation or chemigation system setup is pretty straightforward, but there are some key aspects that you must get right to avoid any issues.
So if you are not familiar with the type of pump you need, not to mention the other components that make it all work, this article will give you the information you need. Let's get to it.
Components Needed for Injecting Fertilizer or Chemical into a Center Pivot Irrigation System
The main components needed to inject fertilizer are the pump, check valves, hose, strainer, and tank. Several types will work as long as they meet the necessary size, flow, and compatibility requirements.
Positive Displacement Pump
Check Valve
Tank
Hose/Plumbing
Strainer
It is important to note that in addition to the fertilizer components we discuss in this guide, you also need a chemigation backflow preventer or check valve on the well. The fertilizer is injected downstream from this valve. The specifics are dictated by local regulations. This chemigation check valve prevents chemicals or fertilizer from getting into the well and contaminating groundwater.
These chemigation check valves are not sold by Dultmeier sales. For more information, you can check out this article from North Dakota State University. You can also check with your pivot dealer.
Injection Pump for Fertigation or Chemigation
If you want to apply fertilizer or chemicals through a center pivot you need a pump. That may be obvious, but you cannot use just any type of pump. While centrifugal pumps are commonly used to transfer fertilizer they will not be effective when it comes to injecting fertilizer into a pivot or any other irrigation pipe.
You need a positive displacement pump to inject liquids into the center pivot or irrigation pipe. This is a type of pump that uses mechanical means to physically move it fixed amount of fluid with each stroke or rotation. These pumps create higher pressure and central pumps and they can overcome the existing pressure in the irrigation line.
There are different types of positive displacement pumps. Piston pumps are commonly used when injecting into an irrigation line but a diaphragm pump can also be used. These injection pumps are rated in gallons per hour. In addition to moving the liquid, the pump also serves as the metering device.
These pumps can deliver a precise amount of liquid into the irrigation pipe, consistently with each stroke. The rate can be adjusted according to the amount of liquid you need to apply.
Irrigation Injection Pump Options
EZ Meter Piston Pumps
Available in 5-30 GPH or 10-100 GPH
Up to 150 PSI
Wettable parts made of stainless steel and polypropylene, Teflon available
Motors available in 12-volt, single-phase 110-220 volt, and three-phase 220-440 volt
We already talked about the chemigation check valve in the irrigation line to prevent backflow into the well. There is another check valve that is needed for the fertigation system. This is installed in the injection port. They ensure fertilizer is released in the center of the pipe, providing even dispersion.
These ensure only fertilizer gets in and nothing leaks when the pump is not running. They also provide back pressure to ensure the pump meters are accurate.
Storage Tank
The tank is pretty straightforward whether you are using a stationary tank or you have a nurse trailer, you must have a vessel to hold your fertilizer. Flat-bottom vertical storage tanks are very common and they are rated to handle heavy fertilizers.
The hose that you use might seem like an afterthought, but the wrong hose could give you a lot of trouble. Just like with the pump, the hose needs to be constructed of material compatible with the fertilizer you are using. For nitrogen fertilizers, EPDM rubber hose works great.
You will need a reinforced suction hose on the inlet side of your pump. This means that from the supply tank to the pump. This hose should also have an inside diameter that is at least the size of the pump inlet. Using a smaller diameter hose can restrict the flow to the pump, damaging the pump and keeping you from hitting your application rate.
The discharge hose does not need to be rated for suction. It should be rated to handle some pressure, the EZ Meter pumps from John Blue can produce 150 PSI. The nature of how these pumps operate does create pulsing. This means that your discharge hose will jump around a bit. So be sure it won't rub on anything that could wear a hole in it during operation.
This is a typical plumbing diagram for injecting metering pumps.
Rinsing the pump is important. You can make it easier to do this by installing a 3-way valve somewhere in the suction line. This would allow you to switch from the fertilizer tank to a freshwater source. You can also use a three-way valve in the outlet of the tank so you can both withdraw and fill the tank without disconnecting the pump.
Filters
It is also vital to use a strainer in the suction line. This strainer should also be at least the size of the inlet port on the pump. A piston pump does not handle solid particles well, so the screen should have a fine mesh. The manufacturer of our piston pumps, John Blue, recommends an 80 mesh screen size to protect the pump.
With the right equipment and setup, you can deliver the nutrients your crops need through your irrigation system. Remember that the correct pump is vital to achieving the accurate results you want. Plumbing things correctly will help prolong the life of the pump and save you time.
Tech Ag & Industrial Sales
Shane Blomendahl is a tech sales veteran at Dultmeier Sales with over 10+ years of experience in liquid handling products covering several industries and applications.
Whether it's farming, construction, or mining, the seamless supply of fuel to your equipment is vital to maintaining productivity. Using the right diesel transfer pump can keep refueling from becoming a bottleneck in your operation.
Several options are available for refilling equipment and bulk transfer of diesel fuel. I have been working with customers to identify efficient ways to refuel equipment for several years. Using that experience and customer feedback, I will break down the options and lay out the best diesel transfer units for several scenarios.
Getting Started: Diesel Transfer Pump Options
Diesel transfer pumps come in many forms to suit various needs. Two common types used for refueling and bulk transfer are rotary vane pumps and centrifugal Pumps. Because diesel is not as volatile as gasoline, there are typically different pumps or safety features required when pumping gasoline. In this article, we are solely talking about diesel fuel pumps and systems.
Mobile Fueling Options
When you are in the middle of a harvest or a construction project, you need to get fuel onsite. This calls for mobile fuel transfer options that run off the power available. Typically this means 12-volt batteries, hydraulic motors, or gas/diesel engines.
12-Volt Rotary Vane Pump Units
You are probably familiar with the 12-volt rotary vane pumps used for mobile fueling. These are the 12-volt pumps that are installed right on top of a fuel tank. Often the pump manufacturer such as GPI or Fill-Rite, will package their pumps as kits. These kits generally include a suction pipe that fits into the pump inlet, a 3/4" or 1" discharge hose, a fuel nozzle, and an optional meter. These pumps feature a 2-inch male NPT inlet that easily attaches to standard 2" tank bung threads.
RELATED: Mechanical Vs Digital Meter: Which One is Best for My Application (not yet written)
These 12-volt pump units are relied on a lot for mobile refueling applications. These pumps are reliable and can last for years. One downside to this type of pump is the flow rate. The highest flow 12-volt fuel pumps are rated to about 25 gallons per minute.
That is pretty good for most scenarios but it does not take into account the loss of flow from the hose, nozzle, fuel filters, and any elevation you are trying to overcome. (Think pumping fuel up into a combine or a large excavator.) When all of this is taken into account, your flow may be greatly reduced.
Pressure loss is a tricky thing to determine, but you can see charts on this page that will help know the pressure loss in your plumbing setup. We will get to ways to get the most flow out of your pump in a moment, but first, let's look at some other high-flow pump options.
Engine Driven Diesel Pump Units
So what if these 12-volt pumps won't cut it? I mean, If you are filling a 300-gallon fuel tank at 15 gallons per minute, it is going to take some time. That is where engine-driven centrifugal pump units come into play. These units offer more flow potential than the smaller 12-volt pumps. That is why we have built diesel fuel pump units to offer a more efficient refueling option for large equipment.
High Volume Diesel Fuel Transfer Systems
Dultmeier High-Flow Diesel Unit Specs:
Flow rate: Up to 60 GPM
Pump Type: Centrifugal pump units
Inlet Hose: 1-inch or 1-1/2 inch
Flow Rate (Assembled):
1-inch version: 30 GPM
1-1/2 inch version: 60 GPM
Additional Features: Shut-off nozzle, filter, hose, reel, meter (optional)
On its own, a two-inch diesel pump driven by a gas engine is capable of moving over 150 gallons per minute. The cost of these pump and engine units is often comparable to the 12-volt pumps that can move 25 gallons per minute. Now, that may sound too good to be true, so let me explain.
When you are filling equipment you will likely need all of these things in addition to your pump: a shut-off nozzle, a filter, plenty of hose, a reel, and possibly even a meter. The 150 gallons per minute flow from a gas-engine driven centrifugal pump is only achievable with the right size hose. For a flow rate of 150 gallons, you would not want to use anything less than a 2-inch hose (inside diameter). Smaller hoses will restrict flow and so will a fuel filter, auto nozzle, meter, and hose reel.
Even though these items reduce the overall flow rate you are still getting a lot more flow from one of these units compared to the 12-volt rotary vane pumps. Especially when pumping vertically into a combine or other large piece of equipment.
We build a 1-inch version and a 1-1/2-inch version. Assembled with filters, nozzles, hose reels, etc., they will still deliver a flow rate of 30 and 60 gallons per minute respectively. This flow rate is at the nozzle and after pushing through 35 ft of hose. The primary limiting factor is the fuel filters used on each unit.
These units are available in various configurations. Base units have recoil start engines and no meters, but you can upgrade to an electric start gas engine and add a meter. Contact one of our team members to learn more.
Stationary/Bulk Storage Tank Pumps
If you have a tanker truck to unload or want to fill your fuel trailers from bulk storage tanks, then you probably need more than a 30 or even 60-gallon flow rate. Well, as we discussed earlier, centrifugal diesel transfer pumps can achieve much higher flow rates than this, you just need the right plumbing. Let's examine the bulk diesel transfer pump options.
Electric Motor Driven Centrifugal Pump Units for Diesel
As referenced above, a two-inch centrifugal pump is capable of well over 150 gallons per minute. But you don't have to limit yourself, for bulk transfer you can use larger pumps. Three-inch pumps can potentially move 300-500 gallons per minute or more. There are also plenty of larger diesel transfer options if your scenario requires it.
How to Choose a Diesel Transfer Pump for Bulk/Storage Tank
When you are looking for a high-flow transfer pump to handle bulk diesel transfer or truck unloading, here are the main things to consider:
Flow Rate: Decide how quickly you need to move your fuel. For example, if you want to fill a 1000-gallon fuel trailer in 10 minutes, you'll need a pump with a flow rate of at least 100 gallons per minute (GPM).
Power Source: Determine what pump drive type will work best for you depending on available power sources and site conditions.
Self-priming vs Straight: Choose self-priming If the pump needs to lift fuel from a lower level, such as from an underground tank. Use a straight centrifugal pump when the pump inlet is permanently lower than the liquid level of the tank.
Material Compatibility: Select materials that are compatible with diesel to prevent corrosion and ensure longevity. Metals: stainless, cast iron, aluminum, ductile iron, Rubbers: nitrile, buna, Viton®.
You might be asking, "But what about filters or fuel nozzles, won't those limit the flow rate?". They certainly can if they are not rated to accommodate higher flow rates. Fortunately, there are high-volume filters and nozzles available for these applications.
Viking series filters are designed for high-volume fuel transfer. There are different models and they will handle 120-300 gallons per minute.
To maximize the flow rate from a diesel pump, it's essential to consider several factors that can influence performance, including hose size, fitting size, filters, nozzle, and vents. Let's break down each component and how they contribute to optimizing flow rate.
Hose Size
The flow rate of fuel through a hose depends on the size of the hose's inside diameter. If you double the diameter of the hose, the flow rate can increase significantly. Bigger hoses reduce friction inside the hose. Smaller hoses create more resistance, which slows down the flow of fuel. A larger hose allows the fuel to flow more freely and quickly.
Tips to Maximize Flow:
For discharge hose, use the largest hose diameter possible to minimize friction loss. Example: for a 2-inch pump, use a 2-inch or larger inside diameter hose.
Ensure the hose length is only as long as necessary; longer hoses can reduce the flow rate.
Ensure the suction hose or pipe (this is any pipe or hose prior to the pump inlet) is large enough for the pump. Again, for a 2-inch pump, you need at least a 2-inch (inside diameter) suction hose or pipe. Same for 3-inch, 4-inch, etc.
Fitting Size
Similar to hose size, the diameter of the fittings used in the diesel pump system must be adequate to handle the desired flow rate without creating bottlenecks. You might have a 2-inch discharge hose, but if you use a 1-1/2 inch elbow or swivel, that will result in a flow reduction. If you have multiple points where there is a smaller fluid path, this really adds up.
Tips to Maximize Flow:
Select fittings that match or exceed the inner diameter of your hoses.
Avoid unnecessary bends, elbows, and reducers that can increase friction and reduce flow.
Filters
Filters are crucial for maintaining fuel quality but can introduce resistance and reduce flow rate if not appropriately sized or maintained. There are two size dimensions to consider with a fuel filter: port size and filter size.
Filter port size refers to the inlet and outlet on the filter. As a rule of thumb use a filter head with ports that match your hose size and pump outlet. Not all filters flow the same even if they have the same port size. One filter may allow a max flow of 18 GPM while another may be designed for 25 GPM. We can provide the flow rate of various filter types to find the best fit for your operation.
The reason for the different flow capabilities is due to the type of filter element inside the filter housing. These are available in various levels of filtration. Often this is measured in micron size. The smaller the number, the smaller the particles it will filter. 2, 10, and 30 microns are common filter sizes for fuel. While finer filtration is good, it can significantly affect your flow rate.
Tips to Maximize Flow:
Choose filters with a flow rating that matches or exceeds your pump's flow rate.
Regularly maintain and clean filters to prevent clogging and flow restriction.
Use 10 microns for most applications, and 30 microns for heavier fuels like diesel fuel.
Discharge nozzles are necessary to stop flow when filing is complete, but these nozzles, especially automatic nozzles, can restrict flow. It is important to know that not all nozzles will flow the same even if they appear the same size.
You can see high-flow fuel nozzles here. There are typical nozzles that will handle 15-20 GPM, but also larger auto nozzles that can handle flows of 75 and even 100 GPM.
Tips to Maximize Flow:
Only use automatic or "service station" style nozzles when needed. For bulk transfer use ball valves instead as your shut-off. These have higher flow rates.
Vents
Proper tank venting is essential to maximize your flow. You must be able to remove air from your tank to add fuel, and you must allow air into your tank to withdraw fuel.
Venting is not just about flow rates, it is also a safety issue (see what can happen here). Diesel fumes can be flammable. Ventilation allows these fumes to escape safely, reducing the flammable vapors inside the tank. This minimizes the risk of fire or explosion.
Tips to Maximize Flow: Ask tank manufacturers/retailers to help size vents
Check the vent regularly for clogs or damage
Time & Money Saving Diesel Pump Accessories
Hose swivels are a great tool that makes handling your fuel nozzle easier, but they also keep your hose from wearing out at the ends from the natural twisting and bending that occurs over time when the hose is handled.
Similar to a swivel, but these fittings are not "live" swivels. Pipe unions allow for the quick disconnection of pipes without the need to rotate them. This is particularly useful in tight spaces where turning a long pipe might be impractical. You can see the different size unions for fuel here.
Hose Reels
How a hose is handled and stored has a profound effect on its lifespan. For example, a hose rolled up and hung on a hook can wear at the pressure point over time. A hose drug on gravel or rough concrete will suffer from abrasion and be prone to potential leaks.
A hose reel helps to avoid these issues. It also removes the hard labor of rolling up and unraveling a hose. You will also avoid the potential safety hazards from a hose lying on the ground.
Electronic rewind and spring rewind hose reels are available to work with fuel and they come in sizes that can handle up to three-inch hoses:
In the world of demanding industries like farming and construction, the efficiency of refueling operations is crucial. The right diesel transfer pump can transform refueling from a logistical headache into a smooth, efficient process that keeps your equipment running without delays.
There are many options, understanding the specific needs of your operation and the technical aspects of these pumps will help you make an informed choice. Always consider flow rates, power sources, and additional features like filters and nozzles to optimize your setup for maximum productivity.
You can reach out to one of our sales team directly via email or phone if you have any more questions!
Tech Ag & Industrial Sales
Shane Blomendahl is a tech sales veteran at Dultmeier Sales with over 10+ years of experience in liquid handling products covering several industries and applications.
It is no secret that there are quite a few options when it comes to sprayer tips. In fact, our Liquid Handling Catalog has over 30 pages dedicated to different spray nozzles! Fortunately, there is an international standard in place to ensure the consistency and performance of sprayer nozzles used in agriculture. This is crucial because nozzles need to perform reliably to apply pesticides, herbicides, and fertilizers effectively.
This standard, specifically known as ISO 10625, defines these specific nozzle characteristics: spray pattern, flow rate, and droplet size. The standard achieves this by implementing a numbering system that helps identify and categorize nozzles based on their performance characteristics and specifications.
Numbering System for Spray Nozzles
Now that we have the reasoning behind the numbers out of the way, we can examine what these numbers tell us.
Each spray nozzle is assigned an identification code. This code may consist of letters and numbers. It provides the nozzle type, orifice size, spray pattern/spray angle, and material of construction.
Nozzle Type: Manufacturer nozzle type/name. Denotes specific designs or features specific to this nozzle series such as extended range (psi), twin fans, droplet size, etc.
Spray Angle: The numbering system specifies the angle of the fan produced by the nozzle. Nozzle spray patterns have a vital role in effective coverage. For more details, take a look at this chart that shows the theoretical coverage of nozzles at different angles and spray heights.
Nozzle Size: The numbering system classifies nozzles based on their flow rate at a standard pressure (40 psi). This helps in selecting nozzles that deliver the correct amount of chemical per unit area.
Material/Features: The final part of the code will include information about the nozzle material (e.g., brass, stainless steel, plastic). It can also note other nozzle features such as a specific shape or characteristic of the spray pattern.
Let's look at an example of nozzle numbering using an "XR 110-04 VK" spray tip:
Here is the breakdown of what each section of this sprayer nozzle number/code means for this specific nozzle:
XR: This indicates the type or series of nozzle, in this case, the XR TeeJet, which stands for "extended range". Extended range refers to the wide range of PSI the nozzle will operate at.
110: Represents the spray angle in degrees. This particular spray tip, therefore, will spray at a 110-degree angle.
04: Indicates the flow rate. In this case, it signifies a flow rate of 0.4 GPM at 40 PSI.
VK: Describes the material of the nozzle. "VK" stands for VisiFlo ceramic. This indicates that the nozzle tip is made of ceramic and follows the VisiFlo* color code.
*Just a quick note, VisiFlo was the color coding system started by Teejet to categorize different-size nozzles. This system was adopted by the ISO standard that is used today. The code assigns a color to each nozzle side:
Not all spray tips make it this easy. In some cases, spray tip numbers are not displayed as clearly on the nozzle face but instead may be labeled on the side or base of the nozzle. This variance in numbering location is because manufacturers often offer numerous nozzle types that vary in design, which of course further differs for each manufacturer.
Further complicating matters, some spray nozzle brands do not adhere to the ISO color coding system. To illustrate these differences, let's take a look at a few examples.
Example Sprayer Nozzle Numbers & Comparisons
First, lets look at two nozzles from the same manufacturer and family/type. The only difference between the two is the sizes or flow rate:
The red nozzle is an 04 size and the yellow nozzle is an 02 nozzle.
Now, sometimes the numbers are not this clearly displayed. Both of these are Teejet nozzles, but they are different types. You can clearly see the numbers on the XR spray tip but this other nozzle does not have the numbers listed in this form.
You can see that the nozzle does have an 04 on the tip, this along with the color indicates the size, as all red nozzles are going to be an 04 size. It does say Turbo and Teejet on the side but it is hard to see.
You will notice that there is no indication of the spray angle or the material. But, if we look up a TT nozzle in our catalog you can see that a Turbo TeeJet is going to have a 110-degree tapered flat fan and is made of polymer. This is an example where the manufacturer, because of the unique design of their spray tip, has only labeled the nozzle with the nozzle series (Turbo Teejet/TT) and the size (04).
Since all sizes within this family of nozzles share the same spray angle and material, the nozzle type is understood to stand in for this information without it having to be shown directly on the tip as with the XR nozzle. If you are uncertain or have a nozzle that lacks numbers clearly displayed on it, call us, we can help you!
In our next photo, we have two nearly identical nozzles. Same brand, same type, same size, and color; however, there is a significant difference in the spray pattern produced by each one. Once more, the numbers tell the story.
First Number: We know the first set of numbers is the spray angle. So here, the nozzle on the left produces an 80-degree fan, while the nozzle on the right will produce a 110-degree fan.
Second Number: We know this portion of the number signifies the size of the nozzle, which in this instance is 04 for both. We know this from the number as well as the color.
Letters: This is where things start to get interesting. The nozzle on the left does not have any prefix numbers (More on this in a bit). Conversely, the nozzle on the right is an XR tip. As we explained earlier, this means it is an extended-range flat fan tip. The final set of letters indicates the material of the tip, which for the nozzle on the left is VS (stainless) and on the right is VK (ceramic).
But what about that "E" before the VS on our first nozzle? This notes that the nozzle has a special spray fan. It is not the standard tapered flat fan found on most ag sprayer nozzles. Instead the "E" tells us that the nozzle produces an even spray pattern.
This one little letter makes these two nozzles very different. The XR nozzle will give you a tapered flan fan pattern. It applies the most spray in the center of the pattern, with less towards the edges. This is designed to overlap with other nozzles on a boom. An even fan spray nozzle, on the other hand, produces a uniform spray pattern across its entire width. This type is ideal for band spraying, where a consistent amount of spray is needed over a specific strip or band. Unlike the tapered flat fan nozzle, it does not taper off at the edges.
For our last comparison, let's look at Greenleaf TurboDrop nozzles. These nozzles all consist of two pieces that each have different numbers on them. This can lead to some confusion. The reason for the two sets of numbers is that they are made up of two sections: a venturi pre-orifice and a tip/cap.
Below we have a TDXL11004 TurboDrop series nozzle. The venturi, which is the red portion, has a size number on the side. For the TDXL11004, that number is TD 04. This follows the same color code and size code as other flat fan nozzles.
The tip/cap, which is white for this particular nozzle, will also have a number. You will notice that our number is 110-08 and the color is white. If you remember, a nozzle with 04 in the number will have a flow of 0.4 GPM. So what is this 08 tip doing on a nozzle that says it is rated for 0.4 GPM?
Greenleaf TurboDrop nozzles are designed to reduce drift and still offer excellent coverage. Their two-piece design pulls air into the droplets to create a consistent droplet size. The venturi or pre-orifice controls the rate while the tip/cap produces the fan. Consider the TDXL11004, On its own the white 08 tip/cap could be used as a standard 11008 spray tip that will produce finer droplets.
When combined with the venturi, though, it becomes an effective air-induction nozzle. The tip is double the size of the pre-orifice and this difference is what helps pull air into the nozzle resulting in larger air-filled droplets.
Using These Numbers: Spray Nozzle Charts
Once you understand spray nozzle numbering, you'll be able to better choose the right nozzle for your specific application. Identifying the number on the nozzle is just half the battle. You will also need to know how to read a spray nozzle chart to compare nozzles and examine the different characteristics of each type.
A spray nozzle chart provides all the necessary information you need to determine how a nozzle will perform under various operating pressures. These charts are provided by the nozzle manufacturers, TeeJet, Wilger, Hypro, Greenleaf, etc. Nearly all spray charts will display the following information:
Flow Rate: The amount of liquid delivered per minute at a specified pressure, usually measured in gallons per minute (GPM) at 40 psi.
Spray Angle: The width of the spray pattern produced by the nozzle, measured in degrees.
Droplet Size: Classification of the droplet size produced, which can range from very fine to extremely coarse.
Operating Pressure: The range of pressure that the nozzle will perform as intended, usually measured in pounds per square inch (PSI).
Application Rate: The amount of liquid applied per unit area, expressed in gallons per acre (GPA).
Sprayer Nozzle Chart Example
This is a nozzle chart for the Air Induction Turbo TwinJet Nozzles. You can see that the nozzle capacity (flow rate), droplet size, and GPA is displayed at various pressures:
Spray nozzle charts warrant a more detailed discussion to thoroughly understand them. While we won't get into those details in this guide, for more information check out this article on how to use sprayer nozzle charts.
Spray Nozzle Selection Tools
Many spray nozzle manufacturers now also offer electronic spray tip selection tools that offer nozzle recommendations based on your specific application inputs. These tools make nozzle selection easy, but a basic understanding of the numbers behind the nozzle is still important when using these tools:
Understanding the numbering system for spray nozzles is crucial for selecting the right one for your application. The ISO 10625 standard provides a clear and consistent method to identify and categorize nozzles based on their performance characteristics.
Dultmeier handles a large quantity of TeeJet, Wilger, Greenleaf, and Hypro sprayer nozzles in stock and ready to ship. If you need assistance sizing and selecting a nozzle, don't hesitate to reach out for expert help.
Tech Ag & Industrial Sales
Shane Blomendahl is a tech sales veteran at Dultmeier Sales with over 10+ years of experience in liquid handling products covering several industries and applications.
The red nozzle is an 04 size and the yellow nozzle is an 02 nozzle.
